Procusini® Research 3D food printer

The Procusini Research is perfect for experimenting with various own pasty foods in research and teaching. To do this, you can individual settings of all relevant parameters, such as: B. Make temperature, speed and flow rate. 

Three different nozzle diameters are also available for the Procusini Research. These expand their scope for action with regard to the maximum particle size of the food used.

Please note the basic instructions for using your own food .

In principle, various own foods can be used. The food used needs a pasty, homogeneous and stable consistency so that it can be extruded and retain its shape even after printing.

The particle size should definitely be matched to the selected nozzle diameter. To avoid clogging of the nozzle, the maximum particle size should always be smaller than the selected nozzle diameter. Procusini Research offers dosing tips with 3 different nozzle diameters.

In addition to using your own food, the Procusini Research can of course also be used to process your own chocolate and the original Procusini 3D Choco Refills. 

Please note the instructions for using your own chocolate .

Procusini 3D Choco Refills are available in different colors and are optimally matched to the Procusini devices - with a guarantee of success. 

More information about Procusini 3D Choco Refills

The usable printing area and printing height is 500 x 300 x 100 mm (height)

The usable volume of the cartridge is 60 ml and the stainless steel nozzle has a diameter of either 1.0 or 1.2 mm.

The production time depends on the object size and the height of the object.

Example 1: The lettering “Future” (77 x 39 x 4 mm) with 3D Choco takes 3.5 minutes

Example 2: The name “Lisa” (53 x 25 x 4 mm) with 3D Choco takes 1.8 minutes

The production times mentioned above refer to the use of original Procusini 3D Choco Refills. These may vary depending on the food you use, its specific properties and the settings you use accordingly.

Note: The production speed is higher than with the Procusini mini.

The “Exclusive Small Series” application in the Procusini Club allows the production of a larger number of objects (applies to all models except Procusini mini).

With one click the object is duplicated until the production area is completely filled. Very simple and efficient! Now press “Start” and the Procusini will produce a large number of objects one after the other. That saves time.

The number of objects depends on the size and height of the objects to be printed. Depending on the size, up to 30 letterings can be printed with one cartridge filling.

Everything for a quick and successful start is included in the Procusini packages.

An international 12 volt power supply, 230-240 volts, 50/60 Hz with a standard plug is part of the scope of delivery. This means that a Procusini can be operated worldwide.

A room temperature of 20 - 22 °C has proven to be ideal for good printing results.

Since only 3 components come into contact with the food during production, every Procusini model can be cleaned quickly and easily within a few minutes.

With the integrated cleaning function, the stamp can be removed from the print head and wiped with a damp cloth. The stainless steel cartridge and the silicone mat can be cleaned under warm running water. That's all.

The warranty for a Procusini is 12 months.

If you have any questions or problems with your Procusini, please contact our service team directly: service@procusini.com

The Procusini Research 3D food printer is maintenance-free.

The dimensions of the Procusini Research are: width 700 mm x depth 500 mm x height 480 mm

The Basic, Starter and Premium packages offer varying degrees of everything you need to get started straight away.

The available accessories for the Procusini Research 3D food printer can be found here.

You can find a comparison of the Procusini models on the “ Procusini model overview ” page.

Features and areas of application are compared in detail there.